跳至主要内容

Linear Motion Shale Shaker Function and Application


Linear motion shale shaker is the first stage solids control equipment in drilling fluid processing system, well known as solids treating equipment in solids control system. Linear motion shale shaker decides the performance of the whole solids control system.
Linear motion shale shaker for solids control system removes drill cuttings from drilling fluid during mud circulation and drilling. Controlling the solids in drilling fluid is important to control drilling cost and protect environment.

Linear motion shale shakers typically consist of wire mesh shaker screens in various mesh sizes that shake or vibrate the drill cuttings which across and off the screens as the drilling fluid or drilling mud flows through shaker screen and back into the drilling mud system. This separates the solid drill cuttings from the fluid so that it can be recirculated back down the wellbore for continuous well drilling. In oilfield industry, linear motion shale shaker are widely used for drilling mud solids control for oil and gas well drilling rigs.

Linear motion shale shaker can be used in O&G drilling, metallurgy, construction, chemical, food, beverage, etc. industry. KOSUN linear motion shale shaker has benefits like lower energy consumption, higher separation efficiency, better filtration performance, easy to install and maintenance, longer usable life, less noise, and wide range applications.

KOSUN linear motion shale shakers have been exported to over 50 countries and regions, with all types of API Standard screens matching with world top three shale shakers like Derrick, MI-Swaco and Brandt.

Linear motion shale shaker is one of the most important products for solids control, as an API Certified China leading manufacturer for drilling fluids shale shaker and other solids control equipment and drilling waste management equipment, KOSUN keeps developing the world’s most advanced technology for making the shale shakers.

Linear motion shale shaker, shale shaker, solids control, solids control system, drilling fluid, drill cuttings, drilling mud, shaker screens.
标签：

评论

发表评论

此博客中的热门博文

Drilling Cuttings & Drilling Waste Separation Development

Drilling waste separation from the mud at the sedimentary rock shakers is also coated with such a lot mud that   square measure|they're unsuitable for the  drilling fluid recycle or disposal step or are tough to handle or transport. Constituents of the drilling cuttings or the mud coating them, like oil or metals, could leach from the drilling waste, creating them unsuitable for land application or burial needs. forms of materials will be other to drilling cuttings to solidify and stabilize them.  Solidification could be a technology that encapsulate the drilling waste  in an exceedingly monolithic solid of high structural integrity. The encapsulation is also of fine drilling waste particles or of an outsized block orinstrumentality  of drilling cuttings .  Solidification doesn't essentially invol...
发表评论
阅读全文

Drill Cuttings Disposal Management

Drill cuttings disposal is a hot topic these years with global attention to environmental protection, especially in O il & gas industry. D rill cuttings  disposal into environment without any treatment is strictly forbidden. So before disposal, a series methods must be introduced to treat the cuttings and make it reach to disposal standard. Drill cuttings are produced as the rock is broken by the drill bit advancing through the rock or soil; the cuttings are usually carried to the surface by  drilling fluid  circulating up from the drill bit   by  rotary ,  percussion , or auger methods. The drill cuttings are commonly examined to make a record (a  well log ) of the subsurface materials penetrated at various depths. In the oil industry, this is often called a  mud log .   One drilling method that does not produce drill cuttings is  core drilling , which instead produces solid cylinders of rock or soil.   In cable-tool ...
发表评论
阅读全文

Mono Screw Pump Working Principle and Apllication

M ono screw pump , also called  sewage pump  or  progressive cavity pump ,  belongs to the rotor type positive displacement pump .   M ono screw pump  is depend ing  on the screw meshing with liner on the discharge and suction cavity to conveying liquid volume change.   It is a kind of method of pressurized screw pump, a main working parts by bushing has a double helix cavity (stator) and the stator cavity and its meshing singlehead screw screw (rotor).   When the input shaft through the universal joint drive making planets revolving around the center of the stator, rotor stator, rotor, vice is continuous mesh form sealed cavity, the seal chamber volume invariably uniform axial movement, the medium from the suction end of deputy to the stator, rotor pressure side, the suction medium sealed cavity through the stator without stirring and destruction. M ono screw pump  is an ideal pump used to feed drilling fluids to ...
发表评论
阅读全文