Solid Control & Drilling Waste Management Solution

During oil & gas exploration and production, there are lots of drilling cuttings  and fluid  generated. These drilling waste will leak into earth with time going which is great harm to surface and ground water and the surrounding environment even causes pollution, especially in sensitive area harmful to human health and life. Therefore, it is crucial important to drilling waste management before discharged. Here is a simple processing procedure for drilling waste management. The screw conveyor mounted under the shale shaker is used for collecting drilling cuttings from shale shakers and mud cleaners (desander or desilter), then convey the drilling cuttings to the H-G dryer for solid-liquid drilling waste management . There is one conical buried tank under the shale shakers for discharging mud and alleviate the grit in mud tank. Otherwise, if serious grouting off happened, the overflow mud will enter into the conical buries tank to prevent mud grounding. There i

With the increasing attention to environmental protection, drilling waste randomly disposal has been seriously forbid by many countries. Considering the global need of such kind of equipment need, KOSUN  focused on drilling waste management solutions for many years. Contamination of drilling fluids  with drilled cuttings is an unavoidable consequence of successful drilling operations. If the  drilling fluid  does not carry cuttings and caving  to the surface, the rig is not either “making hole” or soon will be stuck in the hole it is making. The drill cuttings that are separated from the drilling fluid on the surface by the so lid s control equipment and some quantity of unrecoverable or economically unwanted drilling fluid are a major source of drilling waste. Drilled and formation solids that are sized smaller than can be removed by the solids control equipment are often reported as drill solids. Some quantity of drill solids will accumulate in the drilling fluid and must be rem