跳至主要内容

Solids Control System Equipment Mud Agitator

Application
KOSUN mud agitator is part of the drilling fluids solids control equipment ,which is mainly used to agitate and mix the drilling mud to prevent solid particles settlement in circulating tank.

Mud agitator is composed of explosion–proof motor, speed reducer, motor base and blade.The connections between motor and speed reducer, speeder reducer and impeller shaft by steel coupling.The impeller is welded by four blades.

Structure
Mud agitator mainly consists of explosion-proof motor, reducer, motor base and impeller assembly, solid couplings are used to join motor with reducer, and reducer with impeller shaft. Four vanes are installed and welded to form the impeller.

Working Principle
The impeller makes the fluid in vortex motion and improves the agitation effect. The pallet among the vanes can prevent solid particles in mud from depositing around the lower vanes after shutdown, which reduces the moment of resistance of deposits against the vanes when starting and avoids the motor from being burned out due to overload starting.
 
Features & Benefits
Helical –bevel gearbox.  
Explosion-proof electric motor.
Sized to process 20 ppg drilling fluid.
2.2~22 KW available.
Compact design,quiet,smooth and easy to maintenance.
标签：

评论

发表评论

此博客中的热门博文

Mono Screw Pump Working Principle and Apllication

M ono screw pump , also called  sewage pump  or  progressive cavity pump ,  belongs to the rotor type positive displacement pump .   M ono screw pump  is depend ing  on the screw meshing with liner on the discharge and suction cavity to conveying liquid volume change.   It is a kind of method of pressurized screw pump, a main working parts by bushing has a double helix cavity (stator) and the stator cavity and its meshing singlehead screw screw (rotor).   When the input shaft through the universal joint drive making planets revolving around the center of the stator, rotor stator, rotor, vice is continuous mesh form sealed cavity, the seal chamber volume invariably uniform axial movement, the medium from the suction end of deputy to the stator, rotor pressure side, the suction medium sealed cavity through the stator without stirring and destruction. M ono screw pump  is an ideal pump used to feed drilling fluids to ...
发表评论
阅读全文

Drilling Waste Separation by Solidification and Stabilization

Drilling waste separation  from the mud at the shale shakers may be coated with so much mud that they are unsuitable for the drilling mud recycle or disposal step or are difficult to handle or transport. Constituents of the drilling cuttings or the mud coating them, like oil or metals, may leach from the drilling waste, making them unsuitable for land application or burial requirements. Kinds of materials can be added to drilling cuttings to solidify and stabilize them. Solidification is a technology that encapsulate the drilling waste in a monolithic solid of high structural integrity. The encapsulation may be of fine drilling waste particles or of a large block or container of drilling cuttings. Solidification does not necessarily involve a chemical interaction between the drilling waste separation and the solidifying reagents but may mechanically bind the drilling waste into the monolith. Contaminant migration is restrict...
发表评论
阅读全文

Water Based Mud Drilling Cuttings Management

In  geotechnical engineering ,   drilling fluid is used to aid the drilling of  boreholes   into the earth , o ften used while drilling  oil  and  natural gas  wells and on exploration drilling rigs , and  also for much simpler boreholes  like   water wells . Liquid drilling fluid is often called drilling mud. The three main categories of drilling fluids are water-based mud (which can be dispersed and non-dispersed), non-aqueous mud, usually called oil-based mud, and gaseous drilling fluid, in which a wide range of  gases  can be used. The main functions of drilling fluids include :  providing  hydrostatic pressure  to prevent  formation fluids  from entering into the well bore, keeping the  drill bit  cool and clean during drilling, carrying out drill cuttings, and suspending the drill cuttings while drilling is paused and when the drilling assembly is brought in and out...
发表评论
阅读全文